IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.
This information is for the following models:
About this download
Benefits and improvementsThis utility updates the STR-DH710 Multi Channel AV Receiver system software to add support for 3D features.
- Mac OS® X
- Windows Vista®
- Windows Vista® 64-bit
- Windows® 7
- Windows® 7 64-bit
- Windows® XP
- Windows® XP MCE
Before You Start
Check the Current Software Version
Please follow the steps below check the current software version to determine if your STR-DH710 Multi Channel AV Receiver needs a system software upgrade to support 3D features.
- Press (on/standby) to turn off the receiver.
- While holding down the INPUT MODE and DISPLAY buttons, press to display the software version.
- If the software version shown on the receiver display is VER 1.004 or VER 1.011, please continue to the next section.
Note: This upgrade can only be installed if the current software version is 1.004 or 1.011.
- Press to turn off the receiver.
Check the Serial Number
Only STR-DH710 Multi Channel AV Receiver units within a certain serial number range require this update to support 3D features.
The 7-digit serial number can be found near the lower right corner on the back of the receiver.
Please enter the serial number without any spaces, and then click "Continue".
If you have any questions or require assistance, please call Sony Support at 239-768-7547.