Sony Support

System Software Update

Improvement on connectivity with Apple TV 4K

    Applicable Models
    About this download
    File Info
    Preparation
    Download & Install

    Applicable Models

    This information is for the following models:

    • VPL-VW665
    • VPL-VW665ES
    • VPL-VW365
    • VPL-VW365ES
    IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

    About this download

    Benefits and Improvements from the latest update

    • Improvement on connectivity with Apple TV 4K

    Previous Benefits and Improvements

    • Resolves an issue where an irregular image occurs with the 4K signal input in HDR mode (VPL-VW365ES)
    • Adds the HDR Contrast function to the Picture Menu(when viewing HDR content) to allow adjustment of the average screen brightness
    • Adds automatic selection of BT.2020 color space when receiving such content
    • Adds an HDR indicator in the Information Menu when HDR content is being received
    • Minor bug fixes
    • HDR image quality improvement
    • New Sony unified control protocol (common protocol/ADCP)
    • Picture quality improvements (Reality Creation, etc.)

    File Info

    Zip File Name

    • sony_pjupdate_2015_2303_pje_auth.zip

    File Version

    • Version 2.303

    File Size

    • 97 MB (101,772,566 byte)

    Release Date

    • 02-19-2019

    Before You Start

    Your firmware may already be up to date, especially if you have a new projector. If the version number is 2.303 or higher, you do not need to update.

    If you're not sure, it's easy to check which version of firmware you have:
    Software version can be checked from “information” menu at OSD.

    Download & Install

    Download and Transfer the Update Folder to Your USB Storage Device

    1. Download the file to a temporary or download directory on your computer.
    2. Extract the update folder from the file. (The original file is compressed)
    3. Connect a USB storage device to your computer.
    4. Transfer the update folder to the root directory of your USB storage device:
      Note: The root directory is the top directory in a file system.
      IMPORTANT: Do not change the name of the folder or copy to any other folder on the USB device.

    Updating the System Software

    CAUTION: During the update process, do not remove the USB device or turn off the projector.

    1. Power off the projector.
    2. Make sure no other USB device is connected to the projector before starting the update.
    3. Insert the USB storage device containing the update folder into USB port of the projector.
    4. Power on the projector. Update process starts automatically.
      Note: The ON/STANDBY indicator will blink green and then amber during the update process. The update process takes about 5 minutes to complete.
    5. Once the update is complete, the ON/STANDBY indicator will light up red, and the projector will enter Standby Mode.
    6. Remove the USB device.
    7. Power on the projector.
      Note: After the update, the initial power on takes about 15 minutes to light the laser. During this period, ON/STANDBY indicator will blink green and all the fan will spin at high-speed. During the updating process, DO NOT unplug/power off the projector.
    8. Once the projector completely starts and the laser is lit, the update process is complete.
    9. Check the current firmware version to confirm that the update has successfully installed.
      Note: If the version number is latest one, the firmware update was successful.