IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.
This information is for the following models:
About this download
Benefits and improvementsThis program updates the camera firmware to version 2.0 and enables the camera to work with SanDisk® Memory Stick PRO Duo™ media cards.
IMPORTANT: This firmware update is only for a DSC-H2 Cyber-shot camera that has a serial number that falls in the range from 3500001 through 3534250, and has Version 1.0 of the firmware installed.
The process for upgrading the firmware is to download the compressed firmware file to your computer (Mac OS X 10.4) and then copy it over to Sony Memory Stick Duo™ media. The media is then inserted into your camera and a series of steps are taken on the camera to complete the installation.
- Mac OS X® 10.4
- 2.88 MB
Before You Start
Determine whether or not this firmware update is needed for your camera
| Only DSC-H2 cameras that meet the criteria for both the affected serial number range and current firmware version should proceed with this firmware update. Follow these steps to check your serial number and firmware version. |
Download & Install
Download and Extraction Instructions
Please continue with the Software Updating Instructions section below.
|Software Updating Instructions|
Performing the firmware update will return all settings, except [Video Out] and [Language], to the default settings. To restore your personal settings, you will need to set them again.
WARNING!!: The file number of the next image to be recorded will be reset to "DSC0001", regardless of the images previously recorded. If you have already recorded images with the camera, newly recorded images may have the same file numbers as images previously recorded. Take care to avoid file name conflicts and to avoid overwriting previously recorded images when transferring images to your computer.