Sony Support

Pioneer® BD-ROM BDC-TD04 Firmware Update (Windows 8 64bit, Windows 7 64bit)

Applicable Models
About this download
System Requirements
File Info
Preparation
Download & Install

Applicable Models

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • SVE14117FXB
  • SVE141190X
  • SVE1411HFXW
  • SVE151190S
  • SVE151190X
  • SVE1511AFXS
  • SVE1511JFXW
  • VPCCB47FD
  • VPCCB490X
  • VPCCB4SFX
  • VPCEG24FX
  • VPCEG26FX
  • VPCEG27FM
  • VPCEG290X
  • VPCEG2BGX
  • VPCEG36FX
  • VPCEG37FM
  • VPCEG390X
  • VPCEH27FX
  • VPCEH290S
  • VPCEH290X
  • VPCEH2BFX
  • VPCEH2EFX
  • VPCEH2GGX
  • VPCEH2HFX
  • VPCEH2JFX
  • VPCEH36FX
  • VPCEH390X
  • VPCEH3CFX
  • VPCEH3NFX
  • VPCEJ26FX
  • VPCEJ28FX
  • VPCEJ290X
  • VPCEJ2AFX
  • VPCEL26FX
  • VPCF244FD
  • VPCF245FD
  • VPCF2490S

About this download

Benefits and improvements

This utility installs an updated version of the Pioneer BD-ROM BDC-TD04 Firmware to resolve an issue where the computer cannot start Windows® if an audio CD is in the optical drive.

System Requirements

Operating Systems

  • Windows® 7 64-bit
  • Windows® 8 64-bit

File Info

File Name

  • EP0000600644.exe

File Version

  • 1.01

File Size

  • 5.22 MB

Release Date

  • 02-11-2013

Before You Start


Important Notes

  • During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.
  • To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
  • It is highly recommended that you print out these instructions for use as a reference during the installation process.

Download & Install


Download and Installation Instructions

  1. To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
  2. Download the EP0000600644.exe file to a temporary or download directory (please note this directory for reference).
  3. Go to the directory where the file was downloaded and double-click the EP0000600644.exe file to begin the installation.
  4. If the "User Account Control" screen appears, click "Yes".
  5. At the "Select Country" screen, select the country for this installation, and then click "Next".
  6. At the "PIONEER BD-ROM BDC-TD04 Firmware Update Ver. 1.01" screen, click "Next".
  7. At the "License Agreement" dialog, read the agreement, then, if you agree, click "I Agree" to continue with the installation.
  8. At the "Finished" screen, click "Finish".

NOTE:The computer must be shut down after the firmware update is complete. After the computer has been shut down, wait 60 seconds then restart the computer.

After the computer restarts, the installation of the Pioneer BD-ROM BDC-TD04 Firmware Update is complete.

NOTE: Please verify the version installed is 1.01. If for any reason it is not Version 1.01, please run this update again and shut down the computer. Wait 60 seconds then restart the computer.
How to verify the version installed in Windows® 7
  1. At the Windows 7 desktop, click "Start", "All Programs", "System Tools".
  2. Select "System Information", and double-click "Components" then click "CD ROM".
  3. At "PNP Device ID" version 1.01 is shown.
How to verify the version installed in Windows 8
  1. Search for "Performance Information and Tools".
  2. Select "Settings" then click "Performance Information and Tools" to the left on your screen.
  3. Click "Advanced Tools", then click "View advanced system details in System Information".
  4. Double-click "Components" then click "CD-ROM".
  5. At "PNP Device ID" version 1.01 is shown.