The computer doesn't recognize the USB connection from a camera

If using a USB cable, make sure you are using the cable that was supplied with the camera. Sony does not guarantee the operation of USB cables from other manufacturers.

1. Depending on the camera model, the supplied cable will have the words Sony Corp. printed on the cable.
   
2. If you need a USB cable from another manufacturer out of necessity, such as losing the cable supplied with the camera, use a USB-standard-compliant cable with USB 2.0 or higher and data transfer capability. 
3. Check the USB cable specifications to be sure the cable can support charging and data transfers.
4. Try a different USB cable, making sure it supports charging and data transfers.

1. Make sure the USB ports on both the camera and computer are not dusty or dirty.
   • Use a soft, dry cloth to remove any dust or debris.
2. Make sure the memory card is properly inserted into the camera. This step isn't needed if you want to retrieve images from a camera with internal memory.
3. Turn the camera on and connect the supplied USB cable to the camera and computer. Make sure that the connections are tight and secure.
   Notes:

   • Use the supplied USB cable.
   • If your camera has a USB Type-C™ terminal, you can transfer images faster if you use a USB 3.1 compatible USB Type-C cable.
   • If your computer only has a USB Type-C port, a USB conversion adapter is required.

     

   • A gap will remain between the camera's USB terminal and the USB cable once inserted.

   • 

4. If the computer doesn't recognize the camera even after performing the operations above, check the following:
   • If the computer and the camera are connected via a USB hub, connect the USB cable directly to the USB port of the computer.
   • Connect the camera to a USB port on the computer that has already recognized a mouse or other device.
   • Try to connect the camera to other USB ports on the computer.

Note: Depending on the model, the displayed content or setting method may differ. For details, refer to your instruction manual.

Set the USB Connection and USB LUN Setting:

1. Set USB Connection and USB LUN Setting as follows:
   • MENU → (Setup) → USB Connection → Mass Storage
   • MENU → (Setup) → USB LUN Setting → Multi
     Note:

     • In some cases, the computer may not support USB LUN Setting → Multi. Change the parameter to Single if the connection fails.
     • If you set USB LUN Setting to Single on a camera with two memory card slots, you can only import images from Slot 1.

2. The connection is ready if a USB MODE Mass Storage message is displayed.

   .

• For a Microsoft Windows computer:
  • If the USB Connection and USB LUN settings are as advised in Step #3, then once you connect the camera to the computer:
    • Type File Explorer in the Search Bar on the Taskbar.
    • Select File Explorer to open.
    • If connecting properly, a window will display with the camera as a USB Drive.
    • Selecting the USB Drive opens the window to view or import images and movies:
      • 
        Note:

        • For a Microsoft Windows computer with PlayMemories Home installed:

          • If you set the USB Connection of your camera to MTP, the message To use (camera model) with PlayMemories Home, the USB operation mode must be changed. Do you want to continue? appears.
            • Select Yes to import images using PlayMemories Home.

              

            • Select No to continue without PlayMemories Home.

• For Apple computers:
  • A NO NAME icon appears on the Mac desktop if the camera is recognized.
  • If the USB LUN Setting is set to Multi, the PMHOME icon also appears.

    

• If the issue still occurs, restart your computer.