Note on Sony account: Before downloading the software, we recommend that you create a Sony account. After creating a Sony account or signing in with your Sony account, download the software (for customers in the USA and Canada). You also have the option to download the software without an account.
What to Keep in Mind Before Performing the Update
Updates should be installed in chronological order: Ver. 2.15 or earlier→ Ver. 3.01→ Ver. 5.01. If you try to install Ver. 5.01without updating to Ver. 3.01, an error will occur and you will notbe able to update your camera.
Some settings will notbe carried over to Ver. 5.01, even if they were previously saved using the Save/Loadsettings. When updating from Ver. 4 or earlier, we recommend writing down the following settings in advance:
Network Streaming, Cloud Connection, and Access Authen.settings
Switch Focus Areaand Send to Smartphonesettings registered to Custom Key
Version, Touch Sensitivity, and Touch Panelsettings registered in My Menu
This update is only available for memory cards. Windowsand macOSversions are notprovided.
You can download the software update using the Creators' Appavailable in the App Storeand Google Play.
Benefits and Improvements
Fixes an issue where part of the green frame indicating the AF (autofocus) status was not displayed when using the Expand Spotfeature
Supports the Write Digital Signaturefunction for still images as part of Sony's Camera Authenticity Solution.
Installation of a paid license is required for use.
The timing for the provision of paid licenses to customers other than certain media outlets is yet to be determined.
Services may not be available in some countries or regions. For more information, please visit the Authenticity Catalog Page.
Adds log shooting mode, which allows you to shoot while displaying the monitor image with your favorite LUT(Look-Up table)
Please use the latest version of Catalyst Browseor Catalyst Prepareto apply the LUTused for monitoring during shooting to the video during editing.
Allows you to add OK/NG/KEEPflags to clips during or after movie recording
Adds a function that automatically creates still images with Shot Marksfrom movie frames after recordings
You can add a Shot Markwhile shooting or playing a movie and use it as a mark for selecting, transferring, or editing the movie.
Allows the use of Focus Magnifierand Auto Magnifier in MFwhile using the Bright Monitoringfeature
Adds the Golden Ratio Gridoption to the Grid Line Type settingmenu
Adds support for focus bracket shooting, which allows for continuous shooting while automatically shifting the focus position
Introduces additional settings for exposure value adjustments and number of shots in the exposure bracketing
Allows use of the Custom Key setting on the AELbutton and Deletebutton during playback
FTP Transfer & Network functions:
Allows scheduling of FTP transfers while writing data to the camera's storage media
You can now continue shooting while transferring captured photos and videos to a smartphone or tablet
Ver. 2.9.0 or laterof the Creators' Appis necessary. The Creators' Appmay not be available in some countries or regions. For more information, please visit the Creators' Cloudsupport website.
Transfer to smartphones and tablets can now be resumed even if interrupted in the middle of a transfer
Ver. 2.9.0 or laterof the Creators' Appis necessary. The Creators' Appmay not be available in some countries or regions. For more information, please visit the Creators' Cloudsupport website.
You can now transfer only the differences that have not yet been transferred to your smartphone or tablet, or add videos to be transferred during the transfer process
Ver. 2.9.0 or laterof the Creators' Appis necessary. The Creators' Appmay not be available in some countries or regions. For more information, please visit the Creators' Cloudsupport website.
Adds support for the Network Streamingfunction
Settings must be adjusted in the Creators' Appin advance. For more information, please visit the Creators' Appsupport website.
Ver. 2.9.0 or laterof the Creators' Appis necessary. The Creators' Appmay not be available in some countries or regions. For more information, please visit the Creators' Cloudsupport website.
Supports the following Monitor & Controlapp functions
Ver. 2.3.0 or laterof the Monitor & Controlapp is necessary. The Monitor & Controlapp may not be available in some countries or regions.
Clip review during camera playback mode
Focus map display
IRIS operation bar display
Others:
Allows notifications to be displayed when the latest software is available for your camera
The Security (IPsec)functionality is no longer supported. Please enable and use Access Authen. as it provides more secure protection
WPAand WEPfunctionalities are no longer supported. You will no longer be able to select WPAor WEPwhen connecting to Wi-Fi. Please use the more secure WPA2or WPA3 moving forward
Fixes an issue where the Detailfeature does not work when the Picture Profileis set to S-Cinetone
The ISO valueis displayed incorrectly when outputting a RAW video to a RAW-compatible device connected via an HDMI cable
The upper and lower limit setting ranges are incorrect when the ISO valueis set to Auto
Fixes an issue where the camera may not be able to connect to the network
Support for Mobile applications:
Adds support for the Creators' App Notes:
The new Creators' Appmobile application replaces the Imaging Edge Mobileapp. The Creators' Appallows you to transfer images from the camera to your smartphone, shoot remotely, and use other various functions.
Availability varies depends on country and region.
Adds support for the Monitor & Controlapp Notes:
The Monitor & Control appconnects wirelessly to a camera and enables video monitoring and remote control with a smartphone or tablet.
Availability varies depends on country and region.
Shooting & Playback functions:
Adds support for the Relay Playbackfunction
Adds support for Breathing Compensation Note: For compatible lens information, please refer to the support page.
Adds support for DCI 4K (4096 x 2160) and 24.00p recording Notes:
Availability varies depends on country and region.
You need to install a free license to use it.
Adds a function that allows you to narrow down the images to be played back using multiple filtering conditions such as FTP transfer status
The maximum number of images that can be recorded in one folder has been increased to 9,999
Allows Timecode input with multi/micro USB terminal. You can set the timecode with the source equipment Note: A dedicated adapter cable, which is sold separately, is required to connect to the timecode source equipment.
Adds support for importing/switching multiple IPTC Presets
Adds support for C2PAformat.(The license availability date is undecided)
Adds support for Custom Grid Line Notes:
Availability varies depends on country and region.
Custom Grid Lineis available as a paid license.
FTP Transfer & Network functions:
Allows you to upload camera images directly to the Creators' Cloud app Notes:
Availability varies depends on country and region.
Creators' AppVer. 2.3.1 or later is necessary. Settings must be adjusted in the Creators' Appin advance. For more information, please visit the Creators' Appsupport website.
You can now automatically schedule FTP transfer of protected movies and still images
Movies/still images transferred via FTP transfer can now be automatically protected
You can now transfer specific images with priority during FTP transfer
Adds support for SFTP (Support File Transfer Protocol) to security protocols
Wireless LAN security now supports WPA3-SAE
Improves remote shooting and image transfer security when using the Creators' AppandImaging Edge Desktopsoftware Note: Please update the Imaging Edge Desktopsoftware to the latest version (Ver. 3.7.0 or later).
Others:
Fixes an issue where the time code wasn't always retained after a power restart
Improves the exposure stability when using extended ISO during movie recordings
Allows proxy recording during a remote computer connection
Improves the accuracy of the Eye AFfeature
Improves the stability of the custom white balance
Improves eye sensor detection performance with strong light sources, such as sunlight
Fixes an issue where a Picture Profilemay be applied even though the Picture Profilefeature is set to Off
Improves the operational stability of the camera when using the Imaging Edge Desktop (Remote)or Imaging Edge Mobileapps
Fixes an issue where an error message may appear while shooting at a high shutter speed
Fixes an issue where a file saved in the memory card may not be loaded by the Save/Load Settings
Improves the overall stability of the camera
Adds the P11:S-Cinetonepicture profile preset Note: S-Cinetoneis a new video look that introduces a color matrix that produces highly regarded skin tones.
Adds support for setting Steady Shotto Activeduring recording movie with S&Q Frame Rate Note: The Activesetting cannot be selected if theS&Q Frame Rateis set to 120fps/100fpsor higher.
Fixes an issue where FTP transfer could fail when used with some USB-LAN conversion adapters Note: Not all USB-LAN conversion adaptors are guaranteed to operate properly.
Improves connection stability of USB tethering when using an iPhone Notes:
Currently, the USB tethering function does not support iOS 14.
We recommend using a smartphone and USB cable that support USB-PD (USB Power Delivery).
File Info
Name:BODYDATA.DAT
Version:5.01
Size:743 818 632 bytes
Release Date:05-28-2026
Preparation
Check the System Software Version of Your Camera
Follow the instructions below to check the system software version of your camera:
Select Menu→ Setup→ Setup Option→ Version → Body.
The system software version will be displayed.
Update Sequence
If the system software version is Ver. 5.01, the update is notrequired.
If your camera is running Ver. 2.15 or earlier, you must first update to Ver. 3.01 before installing Ver. 5.01.
Installing Ver. 5.01 directly without updating to Ver. 3.01 will result in an error, and the software update will fail.
If the Date/Timesetting screen appears when you turn on your camera, set the date and/or time correctly.
Saving the System Software Data to a Memory Card
IMPORTANT: Make sure there is only one BODYDATA.DAT file on the memory card.
To save the system software data to a memory card:
Click the Downloadbutton.
After reading the disclaimer, click Download.
Save the file to your computer.
Insert the formatted memory card into the computer.
Save the BODYDATA.DAT file in the root directory of the memory card. Do not change the file name.
Notes:
Please use this camera to format the memory card in advance.
Before formatting, copy the data to a computer or other device.
After formatting, the data on the memory card will be permanently deleted and cannot be restored.
Please refer to the instruction manual of the camera for compatible memory cards.
Power Requirements
Power source: Use a fully charged rechargeable battery pack (NP-FZ100).
The update can only be performed when the battery power level is 51% or higher. We recommend you use a fully charged battery.
Hardware Requirements
Detach the vertical grip from the camera before updating the system software.
Updating the System Software Version
Important Notice
Use a fully charged rechargeable battery pack (NP-FZ100).
Do not remove the batteryduring the update. Doing so may cause the camera to become inoperable.
It may notbe possible to update if the camera temperature is high. Please wait until the temperature drops before updating.
Step 1: Update the System Software of Your Camera
Insert the memory card that contains the saved system software data into slot 1of the camera. Only slot 1will recognize the system software data.
Select Menu→ Setup→ Setup Option→ Version→ Body.
Select Software Update.
Select Executeon the system software update confirmation screen. The software version update will start. On-screen message:
Update? X.XX → Y.YY
X.XX:Current version number
Y.YY:Newest version number
Notes:
Do notremove the battery or memory card during the update.
After confirming the details, click the Executebutton.
Scroll down as needed to view the full text.
When the system software update starts, a black screen will appear. The access lamp will flash 1 time→ 3 times→ 5 timesdepending on the progress. The update will take approximately 6 minutesto complete.
When the update is complete, the camera will automatically restart. After restarting, press OKon the “Body update complete”screen.
Step 2: Confirm the System Software Version of Your Camera
Select Menu→ Setup→ Setup Option→ Version→ Body.
The system software version will be displayed. The update was successful if the screen shows Ver. 5.01.
If the Update Fails
If the system software was not copied correctly to the memory card, the camera may display an error messageor signal an errorusing the access lamp.
What You May See:
The message "The target model for the update file is incorrect" appears on the camera monitor.
The access lamp blinksin one of the following patterns:
5 long blinks(0.5-second cycle) followed by 6 short blinks(0.25-second cycle)
7 long blinks(0.5-second cycle) followed by 7 short blinks(0.25-second cycle)
What This Means:
The camera may not have been updated to Ver. 3.01 or later before attempting this update.
The system software may have been copied incorrectly to the memory card.
What to Do:
Remove the battery and memory card from the camera.
Prepare another memory card.
Start again from the Saving the System Software Data to a Memory Cardsection of this article.
Please accept Youtube cookies to watch this video
Access your cookie preferences below and make sure to switch on the Youtube cookie under the 'Functional' section.
