IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.
What is Silent Shooting?
Silent Shooting is a camera feature that allows you to shoot images without the sound created by the mechanical shutter. The effect on images may vary depending on the camera model and camera settings.
Restrictions when using the Silent Shooting mode
Silent Shooting can only be selected when the shooting mode is set to P, A, S, M (or P/A/S/M/AUTO on the ILCE-1).
Flash can't be used (except ILCE-1).
The minimum ISO sensitivity is ISO100 (except ILCE-1, ILCE-7SM3, ILCE-7C, ILME-FX3, and ILCE-7M4).
- The following functions can't be used:
- Auto HDR
- Picture Effect
- Picture Profile (except ILCE-1, ILCE-7RM4, ILCE-7RM4A, LCE-7SM3, ILCE-7M4, ILCE-7C and ILME-FX3)
- Long Exposure NR
- Front Curtain Shutter Off
- S. Auto Img. Extract.
- Multi Frame NR
- Anti-flicker shoot (except ILCE-1).
- Mechanical Shutter
- Shooting with remote release when an FA-WRC1M Wireless Radio Commander is attached to a Multi-Interface Shoe
For the ILCE-7RM2 camera, continuous shooting can't be selected.
For ILCE-6300 and ILCE-6500 cameras, only Continuous Shooting: Lo can be selected for continuous shooting.
Silent Shooting is turned off when you shoot using apps downloaded from PlayMemories Camera Apps™ website. Reactivate the feature by launching an application, then select MENU → Customer Settings → Silent Shooting on the shooting screen.
Bright areas on the camera LCD may be recorded darker when shooting with low ISO settings. To prevent this, shoot at a higher ISO or adjust the exposure settings.
The time from start-up until you can shoot takes approximately 0.5 seconds longer than usual.
The sound of the aperture and autofocus motor may still be heard when the Silent Shooting feature is on.
Other things to consider
The effects described below are caused by the difference in exposure timing by the electronic shutter at the top and bottom of the sensor.
The movement of the subject and the camera body can cause distortion in the image.
- Panning the camera quickly from side to side may cause vertical lines to appear tilted.
- Distortion may occur when taking photos of children, pets, sporting events, or other fast-moving subjects.
Dark bands or yellow striping may occur in the image when shooting under flickering fluorescent lighting or if the flash of another camera goes off at the same time.