No sound comes out from the SLS-1A speaker
・Make sure that the SLS-1A speaker and the connected device are turned on.
・Make sure that the cables connecting the SLS-1A speaker to your device are firmly plugged.
・Make sure that playback is in progress on the connected device.
・Make sure that the sound volume level of the connected device is high enough. (the Signal Level indicator flashes when a signal is detected)
・Turn off the connected device and then turn it back on.
・When a device is connected to the analog input (INPUT) terminal on the SLS-1A speaker by a cable, make sure that the cable is firmly plugged.
・On the [Routing] tab of the Line-Array Speaker Manager application window, make sure that the input source and the sampling rate are specified.
After you change the sampling rate, click (reboot) on the [Device] tab to restart the SLS-1A speaker.
・If you are connecting through a router, using one providing a transmission speed of 1000 Mbps is recommended.