Sony is offering a system firmware update for Digital Motion Picture Camera BURANO “MPC-2610”.
Sony highly recommends this firmware update for immediate installation on all BURANO systems to ensure the highest performance.
The updated software (V3.00) has been released to add a new function and to improve the performance of BURANO.

Note: The Update Guide and Release Notes are included in the zipped download file with main firmware module.

Applicable model

Digital Motion Picture Camera BURANO “MPC-2610”.

Applicable system software version

The applicable products have system firmware version “Ver.2.10” or earlier.
After updating, the system firmware version will be “Ver.3.00”.

Contents of V3.00

• Addition of Imager Scan Modes
  • FF 5.8K 6:5 (maximum frame rate: 30 fps)
  • S35c 3.8K 16:9 (maximum frame rate: 120 fps)
  • Added X-OCN recording support for S35 1.9K 16:9
• Improved Operability and Workflow
  • Support for Normal Peaking
  • Support for selecting edge detection methods for Color Peaking
  • Support for selecting the tracking target for Real-time Tracking AF using the multi-selector
  • Support for configuring Wireless LAN, Wired LAN, and USB Tethering directly from the status screen
• Expanded Functionality for Live Production
  • Support for HLG Mild
  • Support for simplified SDR display and SDR Gain
  • Support for FPS, Shutter, and Saturation commands from RCP
  • Support for selecting output range for SDI and HDMI outputs
• Other Functional Improvements
  • Added metadata items overlaid on SDI output when Monitor FHD is enabled
  • Support for selecting bandwidth when a 5 GHz channel is set in Access Point mode
  • Improved clip name display method
  • Improved operability from the “Monitor & Control” application

IMPORTANT: Installation of firmware is at owner’s risk – please refer to our terms & conditions for details. Prior to installation, always read installation instructions.