Sony SupportVPL-XW5000ES

Specifications

    • Size & Weight

        • Weight

          Approx. 28 lb (13 kg)

        • Dimensions (W x H x D)

          18.13" x 7.88" x 18.59"

    • Display

        • Picture processor

          X1™ Ultimate for projector

        • Display System

          4K SXRD™ panel, projection system

        • Display Resolution

          720 x 576/50p, 720 x 480/60p, 1280 x 720/50p, 1280 x 720/60p, 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/24p, 1920 x 1080/50p, 1920 x 1080/60p, 1920 x 1080/120p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p, 3840 x 2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096 x 2160/50p, 4096 x 2160/60p

        • Light source

          Laser diode

    • General Features

        • Effective Imager Size

          0.61 in x 3

        • Throw ratio

          1.38:1 to 2.21:1 1

        • Effective pixels

          24,883,200 (3840 x 2160 x 3) pixels

        • Contrast ratio

          ∞: 1 (Dynamic Contrast)

        • Projection lens shift

          Manual, Vertical +/- 71%, Horizontal +/- 25%

    • Hardware

        • Projection lens zoom / focus

          Manual (Approx. x1.60) / Manual

    • Interface

        • Input and Output Terminals

          HDMI (TWO INPUTS) 2 - Digital RGB/Y Pb/Cb Pr/Cr, IR IN - Minijack, LAN - RJ45, 10Base-T/100BASE-TX, REMOTE - RS-232C, D-sub 9-pin (male), TRIGGER - Minijack, DC 12 V Max. 100 mA, USB - Type A, DC 5 V, Max. 500 mA

    • Operating Conditions

        • Operating temperature / humidity

          41 °F to 95 °F (5 °C to 35 °C) / 20% to 80% (no condensation)

        • Storage temperature / humidity

          14 °F to +140 °F (–10 °C to +60 °C ) / 20% to 80% (no condensation)

    • Power

        • Power consumption

          295 W

        • Acoustic noise

          24 dB 3

        • Power requirement

          AC 100 V to 240 V, 50/60 Hz

    • Video Features

        • Color Light Output

          2000 lm

        • Light Output

          2000 lm

    • Eco and energy saving

        • Power Consumption (Networked Standby Mode)

          0.5 W (LAN) (when "Remote Start" is set to "On") When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W)

        • Power Consumption (Standby Mode)

          0.3 W (When "Remote Start" is set to "Off")

        • Standby Mode Activated

          After about 10 Minutes

    • Accessibility

        • Screen Reader

          Yes

    • What's In The Box

      • Remote Control (RM-PJ28)
      • Size AA (R6) manganese batteries (2)
      • AC Power Cord (1)
      • Lens Cap (1)
      • Setup Guide (1)