Article ID : 00010524 / Last Modified : 09/05/2013

How to turn on the Bluetooth adapter using the SmartWi Connection Utility software.

Applicable Products and Categories of This Article

NOTE: Not all computers have an internal Bluetooth® adapter. To see if your computer has a Bluetooth adapter, check the computer specifications. Manuals are posted on your model support page.

  1. Turn on the physical wireless switch.

    NOTES:

    • For model-specific information about the physical wireless switch, refer to the operating instructions supplied with the product. Manuals are posted on your model support page.
    • There is an icon in the system tray that can be used to open the SmartWi Connection Utility software. If possible, click this icon and skip to step 4. Image
  2. Click the Start button, and then click All Programs.
  3. In the All Programs menu, click SmartWi Connection Utility and then click SmartWi Connection Utility to open the application.
  4. In the SmartWi Connection Utility window, in the Bluetooth section, click ON. Image

    NOTE: When enabled, the selector switch will move to ON, as shown below:

    Image