Article ID : 00010656 / Last Modified : 09/11/2014

How to calibrate the touch screen.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

Follow these steps to calibrate the touch screen display.

IMPORTANT: Not all computers have a touch screen display. To see if your computer has a touch screen display, check the computer specifications. Manuals are posted on your model support page.

  1. Click the Start button, and then click Control Panel.
  2. In the Control Panel window, click Hardware and Sound.
  3. In the Hardware and Sound window, below Tablet PC Settings, click Calibrate the screen for pen or touch input.
  4. In the Tablet PC Setting window, click the Calibrate button.
  5. Follow the on-screen instructions to complete the calibration process.
  6. At the Digitizer Calibration Tool prompt, click Yes.
  7. In the Tablet PC Setting window, click the OK button.
  8. In the Hardware and Sound window, click the X in the upper-right corner to close the window.
  9. Restart the computer.