Article ID : 00012498 / Last Modified : 08/15/2015

How to reset the lamp timer on the projector after replacing the bulb.

Applicable Products and Categories of This Article

  1. Connect the power cord and set the projector to Standby Mode. Confirm that the ON/STANDBY red indicator light is on.
  2. While pointing the remote at the projector, quickly press the following buttons: Reset, left-arrow, right-arrow, Enter.

    NOTES:

    • The process described in step 2 must be completed within 5 seconds.
    • Step 2 may need to be repeated in order for the process to work.