Article ID : 00151645 / Last Modified : 08/31/2018

Enable or Disable Samba TV

Applicable Products and Categories of This Article

Your TV type determines the steps to enable or disable the Samba TV® service. Make sure that your TV has an active internet connection. If model-specific information is needed to complete any step, check your manual. Manuals are posted on your model support page. .

Android TV™ Devices

  1. Turn on your TV.
  2. On the supplied remote control, press the HOME button.
  3. Select Settings.
  4. Under System Preferences, select Interactive TV Settings or Samba Interactive TV.
  5. Select Enable or On/Off.
    • To disable Samba TV, select Disable or Off.
    • To enable Samba TV, select Enable or On.

2015 - 2017 Non-Android TVs

  1. Turn on your TV.
  2. On the supplied remote control, press the HOME button.
  3. Go to Settings.
  4. Select Preferences.
  5. Select Setup.
  6. Select Network.
  7. Select Samba Interactive TV.
  8. Select Settings.
    • To turn off Samba TV, select Disable.
    • To turn on Samba TV, select Enable.

2014 Non-Android TVs

  1. Turn on your TV.
  2. On the supplied remote control, press the HOME button.
  3. Select Settings.
  4. Select Network.
  5. Select Samba Interactive TV.
  6. Select Samba Interactive TV: ON.
    • To turn off Samba TV, select Disable.
    • To turn on Samba TV, select Enable.

Note: If Samba Interactive TV doesn't respond, reset your TV to factory settings.