HDMI Connection Specifications for Blu-ray Disc Players

You can get a 4K resolution video with a 24P or 60P video frame rates with the HDMI 1 jack.

To output the optimum resolution, set Output Video Resolution to Auto on the Blu-ray Disc player, as follows:

1. On the supplied remote control, press the HOME button.
2. Select Setup.
3. Select Output Video Resolution in the Screen Settings category.
4. Select Auto.

Yes. It can be connected using HDMI cables either through an AV receiver or directly to a TV. If the AV Separation Mode setting is OFF, both HDMI 1 and HDMI 2 can output video. For further details about the AV Separation Mode, refer to the instructions guide that came with the player. Manuals are posted on your model support page.

If the connected AV receiver or TV is not compatible with 4K, there is no picture on the TV screen when Output Video Resolution in Screen Settings of the Blu-ray Disc player is set to 4K.

In this case, check the following:

• If the TV is not compatible with 4K:
  Set Output Video Resolution in Screen Settings to Auto.
• If the AV receiver is not compatible with 4K:
  Set Output Video Resolution in Screen Settings to Auto, or connect the Blu-ray Disc player directly to the TV with an HDMI cable.

It depends on specifications of your TV or if there is no AV receiver connected in between the TV and the player. The highest available format will be selected.

Yes, it does, except on the UBP-X700 and UBP-UX70 Blu-ray Disc players.

The following formats are compatible except on the UBP-X700 and UBP-UX70 Blu-ray Disc players:

• DSD (DSF and DFF)
• FLAC
• ALAC
• AIFF
• WAV

It is because the transition process of the output resolution takes time until the picture is normally output to the connected device.

In the AV receiver's setting, choose TV output for audio, rather than the audio system.

Yes, except on the UHP-H1 model, where it only supports native 4K videos.