Article ID : 00206306 / Last Modified : 01/10/2019

No Audio from the Soundbar or A/V Receiver After the Software Update

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    The latest software update for your soundbar and A/V receiver adds support for the Enhanced Audio Return Channel (eARC). If your audio device doesn't output sound when connected to the HDMI® (ARC) port on your TV, check if your TV is compatible with eARC. Check your TV manual for model-specific information. Manuals are posted on your model support page.

    If your TV isn't compatible, turn off the eARC function on your audio device.

    • Turn off eARC on your soundbar:
      1. On the supplied remote, press the HOME button.
      2. Select Setup.
      3. Select System Settings or Advanced Settings.
      4. Select HDMI Settings.
      5. Select eARC.
      6. Set to Off.
    • Turn off eARC on your A/V receiver: The steps vary depending on your model.
      • STR-DN1080
        1. On the supplied remote, press the HOME button.
        2. Select Setup.
        3. Select HDMI Settings.
        4. Select eARC.
        5. Set to Off.
      • STR-DH790
        1. On the supplied remote, press the AMP MENU button.
        2. On the front panel display of the receiver, select <HDMI>.
        3. Select EARC.
        4. Set to OFF.

    Note: eARC is a new HDMI® 2.1 standardized function. It adds support for the latest audio formats, such as Dolby Atmos® audio with Dolby TrueHD, DTS:X, or multi-channel LPCM, including those supported by the Audio Return Channel (ARC).