Welcome to Sony Support

Where is the model name located on my product

You'll find more relevant search results on your product page! Simply type your model name in the search bar to reach your product page.

Results: 238

The headphones do not operate properly (1000X THE COLLEXION / WH-1000XM6)details, refer to the Help Guide: 1000X THE COLLEXION WH-1000XM6 If the issue is not resolved after the reset, initialize the headphones. For details, refer to the Help Guide: 1000X THE COLLEXION WH-1000XM6 This operation
WH-1000XX / 1000X THE COLLEXION
Included components may vary by country or region of purchase: 1000X THE COLLEXION
Downloads Manuals Question & Answers
When using the 1000X THE COLLEXION for calls, my voice is too quiet or the other person cannot hear meThe 1000X THE COLLEXION headphones are designed to capture the user's speech from multiple microphones using AI beamforming and noise reduction algorithms, delivering it to the other person on the call. To ensure
Help Guide (Web manual) (WH-1000XX)
- 1000X THE COLLEXION | Help Guide | Charging The headset contains a built-in lithium-ion rechargeable battery. Use the USB Type-C cable to charge the headset before use. Connect the headset to an AC outlet. Use a USB Type-C cable and USB AC adaptor (A). The charging indicator on the headset lights up in orange. When charging is complete, the charging indicator turns off automatically. After charging is complete, disconnect the USB Type-C cable. About the charging time The required time for fully charging the headset is about 3.5 hours (*). (*) Time required for charging an empty battery to its full capacity. The charging time may differ depending on the conditions of use. About charging while using the headset You can use the headset while charging. When using the headset while it is charging, charging will stop at approximately 80% (if the battery level is more than 80%, charging will not start). The value is a rough estimate. The value may vary depending on the ambient environment. Depending on the charging environment (such as
- 19 other search results include the term(s) '1000x'
The headphones react incorrectly when using the touch sensor (1000X THE COLLEXION / WH-1000XM6)When you swipe your finger forward/backward or up/down on the touch sensor control panel, the touch sensor control panel may not work correctly depending on the angle of the wearing or the direction your head is
Help Guide (Web manual) (WI-1000X)
- WI-1000X | Help Guide | Listening to music from a device via BLUETOOTH connectionYou can enjoy listening to music from a BLUETOOTH device wirelessly via a BLUETOOTH connection. You can enjoy listening to music and basic remote control operation of a BLUETOOTH device via a BLUETOOTH connection. The BLUETOOTH device is required to support the following BLUETOOTH profiles. A2DP ( Advanced Audio Distribution Profile ): enables you to enjoy high-quality audio content wirelessly. AVRCP ( Audio Video Remote Control Profile ): enables you to adjust volume, etc. The operation may vary depending on the BLUETOOTH device. Refer to the operating instructions supplied with your BLUETOOTH device. Connect the headset to a BLUETOOTH device. Wear the headset. Put the headset with indication to the left and indication to the right. The unit of the headset has a tactile dot. A: Tactile dot Adjust the headset position to fit your ears. Play back music or video on the BLUETOOTH device. Adjust the volume on the BLUETOOTH device. Adjust the volume by pressing the +/- buttons of the headset
- 19 other search results include the term(s) '1000x'
Help Guide (Web manual) (MDR-1000X)
- Help Guide | Switching the sound quality modeYou can select the sound quality mode when you turn on the headset. The sound quality is set to the “Priority on sound quality” mode as the default setting. When using an AAC, aptX, or LDAC compatible device, use with the “Priority on sound quality” mode. If the connection is unstable, such as when producing only intermittent sound, select the “Priority on stable connection” mode. Sound quality and indicator (blue) of each mode When you switch the sound quality mode, the indicator flashes in blue to show the current sound quality mode. “Priority on sound quality” mode: 3 times - - - - SBC, AAC, aptX, or LDAC is selected automatically. “Priority on stable connection” mode: 1 time SBC Turn on the headset by pressing the button for more than 2 seconds while holding the NC button down. To check the sound quality mode While the headset is powered on, press and hold the button, then press the NC button within 2 seconds (before the power is turned off). The indicator will flash in blue 3 times
- 19 other search results include the term(s) '1000x'
Help Guide (Web manual) (WF-1000X)
- WF-1000X | Help Guide | No sound Depending on the smartphone app (which requires HFP ( Hands-free Profile )/ HSP ( Headset Profile )), you will hear a voice from the left unit only, but you may not able to hear a voice from the right unit. Check that the connected device and both the right and left units of the headset are turned on. An A2DP BLUETOOTH connection is not made between the headset and the BLUETOOTH device. Use the BLUETOOTH device and make an A2DP BLUETOOTH connection. If the volume is too low, turn up the volume. Check that the connected device is playing back. Pair the headset and the BLUETOOTH device again.
- 19 other search results include the term(s) '1000x'
"Sony | Sound Connect" app compatible modelsapp compatible models Update the device's software to the latest version. (As of May 2026) Headphones 1000X THE COLLEXION (WH-1000XX) LinkBuds (WF-L900) LinkBuds Clip (WF-LC900) LinkBuds Fit (WF-LS910N) LinkBuds
[PDF]Operating Instructions (WF-1000X)

Product Repair
Repair information and service assistance
Community
Here you can ask questions and connect with other Sony users
Parts & Accessories
Product information and sales assistance
Register a Product
Keep track of all your products in one location
Contact Support
Product support & customer relations
Support by Sony (Mobile App)
Get Support Content on the Go!