Article ID : 00010188 / Last Modified : 07/23/2019

How to reset the lamp hours on the projector.

Applicable Products and Categories of This Article

To reset the lamp hours after replacing the lamp in the projector, follow the procedure below:

  1. Connect the AC power cord to the projector.
  2. Wait till the ON/STANDBY indicator light is red.

    NOTE: On the remote control, push each button one at a time in the order below for no longer than five seconds.

  3. Press the Reset button.
  4. Press the left-arrow button.
  5. Press the right-arrow button.
  6. Press the Enter button.