Article ID : 00012794 / Last Modified : 08/16/2015

How to adjust the TV on the supplied stand.

Applicable Products and Categories of This Article

Follow these steps if the TV is tilting to the left or to the right: Image

  1. Locate the release screw on the base stand neck assembly. Image
  2. Hold the top of the television panel while loosening the release screw with your other hand.
  3. Using one hand, position the television horizontally (left and right) and vertically (forward and back) to the desired position. Image
  4. Once the desired position is set, use your other hand to tighten the screw.
  5. Make sure that the neck dowel can be seen through the hole in the head of the stand. Image
  6. Make sure that the back plate is securely tightened. Image

If the TV is still tilted, please readjust as shown below:

  1. Loosen the screws.
  2. Using one hand, position the television horizontally (left and right) and vertically (forward and back) to the desired position. Image