Article ID : 00171624 / Last Modified : 03/06/2017

Steps to use the mobile projector via Bluetooth and Screen Mirroring at the same time.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

To use the Bluetooth® function and Screen Mirroring feature of the mobile projector simultaneously, pair the device via Bluetooth connection first, then perform the pairing via Screen Mirroring.

Steps to connect the mobile projector via Bluetooth connection.

  1. Make sure the speaker or headphone is set to pairing mode.

    NOTE: For further details on how to set the device to pairing mode, refer to the instructions manual that came with the mobile projector. Manuals are posted on your model support page.

  2. Press the jog lever while at the ENTER position to display the menu of the projector.

    Enter key

  3. In the menu of the mobile projector, select Bluetooth icon(Bluetooth function).
  4. Select Bluetooth function ON.

    NOTE: After the Bluetooth mark (gray) appears on the screen, the mobile projector shifts into the pairing mode.

    Bluetooth Gray icon

  5. Select Device List Device list.

    Device list menu

  6. Select the device you want to connect with the mobile projector from Available devices or Paired devices, then select Connect.

    NOTES:

    • If passkey entry is required, refer to the instruction manual or manufacturer of the device.
    • A Passkey may be called a Passcode, a PIN code, a PIN number, or a Password.

IMPORTANT: Make sure that the Bluetooth mark color in the screen is blue. If the mark color is gray, it means it is not connected. In this case, retry steps 1 and from 4 to 5.

Steps to connect the mobile projector via Screen Mirroring connection.

  1. Press the jog lever while at the ENTER position to display the menu of the projector.

    Enter key

  2. In the menu of the mobile projector, select Input change (Input change).
  3. Select Screen Mirroring Screen mirroring.

    Selecting the Screen Mirroring menu

  4. Enable the screen mirroring function of your device.

    NOTES:

    • A list of devices is displayed on the screen of the mobile projector.
    • For further details, refer to the instructions guide that came with the your device.
  5. Select the mobile projector model number MP-CL1A in the list.
  6. In the X menu on the mobile projector menu of the mobile projector, select Return key Return to exit the menu.

    NOTE: The screen of the connected device is projected.