The volume is low when the PS-LX310BT turntable is connected via Bluetooth

The PS-LX310BT turntable offers the capability to playback and record vinyl records. The unit can be connected to a computer/digital recording device, a sound system, or Bluetooth® speakers or headphones using the USB, RCA audio cable, or Bluetooth connections.

If you are experiencing low volume when using the device with a Bluetooth connection, then review the troubleshooting steps:

1. Verify the protective stylus cover has been removed.
   
   Note: Slide the plastic cover off using a horizontal motion.
2. Make sure that the turntable is not in the PHONE mode.  If so, switch to the LINE mode on the turntable's back panel.
   
3. Use the GAIN SELECT switch to increase the volume from the turntable.
   
   Notes: After selecting LOW, MID, or HIGH, check the volume on the Bluetooth device to verify volume changes.
4. Verify the Bluetooth connection again by pairing the turntable to the device

   1. Press and hold the turntable's BLUETOOTH button/pairing button for about 2 seconds, and then release it.
      
   2. The indicator rapidly flashes blue.
   3. Turn on the pairing mode for the playback device you wish to connect.
   4. The BLUETOOTH indicator stops flashing blue and remains lit when the pairing is complete.

5. Verify the correct insertion of the stylus:
   1. Hold the cartridge body with one hand and then insert the tab on the spare stylus into the acceptable on the cartridge body.
      
   2. Once the tab is inserted into the cartridge body properly, shift the stylus up to lock it into place.